1. The optical fiber only goes into this multimedia box and does not need to be distributed to other places.
If you want to lead the cable to other places, you must find broadband installers. Ordinary electricians can't get this cable, and they don't have professional tools. Generally, the optical fiber enters the multimedia box after entering, and then the broadband is installed. This is the home line, the cat, and the router must be installed in the multimedia box. Therefore, a power socket should be left in this multimedia box during decoration. Cat, after all routers are installed, plug the network cables in other rooms into the routers. Therefore, the network cables of other rooms should be gathered here.
The fabrication method of optical fiber connector is as follows:
(1) Prepare tools, in order: Miller pliers, stripper, cold connector, fixed length stripper, cutting knife;
(2) Peel the bare leather thread;
(3) Stripped smooth leather thread;
(4) Put the light tape into the fixed length stripper (commonly called caliper in our place), and fasten the upper cover according to the length reserved;
(5) Prepare to peel off the optical fiber coating with miller pliers;
(6) After peeling off the coating, cut the fiber.
Optical fiber splice
, which connects two optical fibers or separable optical fibers together, and has the connection part of the protective component. The optical fiber splice is the end device of the optical fiber. Optical fiber interface is the physical interface used to connect optical fiber cables. Generally, there are SC, ST, FC and other types. FC is the abbreviation of Ferrule Connector. Its external reinforcement method is metal sleeve, and its fastening method is turnbuckle. ST interface is usually used for 10Base － F, and SC interface is usually used for 100Base － FX.
■ Applicable for the FTTx project and provide mechanical protection for a fiber management system that includes the functions of splicing, patching, and passive component integration.
■ Rated to IP68. Suitable for aerial, manhole, direct bury, and wall-mounted.
■ Housing is made of high-quality engineering plastic(MPP) which has good mechanical performance and hydrolysis resistance, chemical resistance.
■ Nut & rubber sealing, real fully mechanical seal system.
■ Easy for re-entry with reusable rubber glands.
■ Easy for operating without any extra cost when reopened.
■ Perfect fiber management - Clear fiber function division and fiber routing.
■ Available for both Wall-mount and Pole-mount.